Skip to content
Request a quote

Services

Request a quote

Low voltage, done properly. Everything below is work we carry out ourselves across The DMV — roughly an even split between homes and commercial spaces.

Structured cabling

The part nobody sees, holding up everything they do

Low-voltage infrastructure is the one thing on a project that is genuinely hard to change later. We rough in for the system you will want in ten years, terminate it properly, and label it so the next person — including us — can work on it.

  • Low-voltage rough-in coordinated with the other trades
  • Rack and IDF build, dressed and terminated
  • Fiber and copper backbone
  • Labeling and as-built documentation at handover

Networks

A network that stops being interesting once it is on

A surprising number of automation problems turn out to be network problems. We design for coverage and headroom first, segment the traffic properly, and monitor it so faults surface before anyone reaches for the phone.

  • Wired backbone sized with room to grow
  • Wi-Fi design and on-site survey
  • Segmentation and VLANs — guest, AV and control kept apart
  • Remote monitoring and alerting

Automation & lighting

Control a guest can operate without a tour

Savant for control, Lutron for lighting and shading, audio where it belongs. Scenes named for what people want rather than for what the hardware does, and one interface that reads the same in every room.

  • Savant control — new systems, takeovers and programming
  • Lutron lighting control and motorised shading
  • Distributed audio, indoor and out
  • Scene design and commissioning

Security & access

Security that lives in the same system as everything else

Cameras, entry and door control planned against the drawings and sharing the same cable, rack and interface as everything else. Coverage is worked out from the plan, so every camera earns its position.

  • Camera systems and coverage planning
  • Access control and door hardware integration
  • Intercom and entry stations
  • Storage sizing and retention to policy

System design

The drawing set is the deliverable

We would rather resolve the layout, the loads and the rack elevation on paper, where changes are free, than work them out in a ceiling. A system that is fully drawn before it is built is calmer for everyone involved.

  • Load, coverage and bandwidth worked out up front
  • Rack elevations and single-line drawings
  • Coordination with builder, electrician and designer
  • A budget you see before the work starts, not after

Authorized dealer

Lines we are authorized to sell, install and support

  • Savant
  • Lutron
  • Origin Acoustics
  • Ubiquiti
  • SnapOne
  • LTS

Being authorized matters for warranty, firmware and support escalation — it means we can raise a fault directly with the manufacturer instead of leaving you to chase it.

For integrators & dealers

Programming help, on a subcontract basis

We take on a limited amount of trade work for other integrators and dealers — usually Savant programming, commissioning, or support on a system you have inherited. Your client stays your client; we stay off the invoice and out of the relationship.

Our capacity for this is limited, so the earlier in your schedule you can ask, the more we are usually able to help.

Talk about a subcontract